Our 310W Mono-PERC solar panels are suitable for off-grid installations and have been manufactured with high efficiency PERC A-grade Trinasolar cells.
The low-iron solar panel glass front is more transparent and the specially textured surface of the solar panel glass refracts light back towards the solar cell to trap more light for higher light absorption, which also creates the low reflectivity properties of the solar panel glass.
The use of PERC technology, which incorporates a passivated emitter and rear cell, reflects light back into the rear of the solar cell to maximise light absorption, increasing overall energy production and efficiency.
A corrosion-resistant anodized aluminium frame surrounds the solar panel to add strength and allows for easy mounting.
An IP68 junction box, which is attached to the back of the solar panel with a weather-tight seal, has 900mm of double-insulated cable for each positive/negative and MC4 solar panel connectors. The bypass diodes in the junction box provide added protection to the solar panel when connected in series during partial shading.
When using a correctly rated MPPT charge controller, this solar panel can be used for a 12V or 24V system. A 48V system would require several panels that would need to be connected in series to increase solar voltage.
Specifications for our 310W Mono-PERC solar panels:
Maximum Power (Pmax) - 310W
Maximum Power Voltage (Vmp) - 28.62V
Maximum Power Current (Imp) - 10.89A
Open Circuit Voltage (Voc) - 33.75V
Short Circuit Current (Isc) - 11.41A
C - +85C
Number of Cells: 54
Cell Type: Mono-PERC Trinasolar
Dimensions : 1500mm x 997mm x 40mm
Wind Load: 2400Pascal
Snow Load: 5400Pascal
Warranty: 10 Years
International compliance:IEC61215-1,IEC61215-2, IEC61730-1 and IEC61730-2 as per AS/NZS5033
Application Class: Class A
Fire Rating: Class C