This heavy duty off-grid solar inverter/charger features the combined functions of a 3KW pure sine wave inverter, 80A MPPT solar charger and 40A AC battery charger to offer an uninterruptible power supply. The built in transformer allows for a 5 second 9KVA surge when using devices or appliances that have high start up current.
Charging parameters can be customised to work with any battery type. The BMS software has been customised for a direct communication link with our Lithium Iron Phosphate batteries using RS485 communication.
Up to six units can be paralleled together for more energy output on a single phase or three phase set up
Grid and generator compatible as an option for back up if solar production is lower from bad weather.
Solar Inverter Specifications:
Battery Voltage: 48VDC
Rated Power: 3KVA/3000W - Power Factor:1.0
Surge Power: 9KVA for 5 seconds
Waveform: Pure sine wave
AC Output Voltage: 230VAC
Inverter Efficiency(Peak) :94%
No Load Power Consumption: <20W
Power Saving Mode Consumption: <7W
Transfer Time: 10ms-UPS; 20ms-APL
Selectable Voltage Range:
154~272 VAC - Appliance (default)
184~272 VAC - UPS
Frequency: 50 Hz
Rated voltage: 48 VDC
Battery types: LiFeP04, SLA, AGM, Flooded, GEL
MPPT Solar Charger:
Maximum PV Array Open Circuit Voltage: 250 VDC
MPPT Voltage Range: 60-250 VDC
PV Input Power: 4500 W
Solar Conversion Efficiency: up to 98%
Max Solar Charge Current: 80 A
Max AC Charge Current: 40 A
Max Combined Solar/AC Charge Current: 120 A
Dimensions and Weight:
Solar Inverter Dimensions (mm): 550mm x 300mm x 225mm
Weight: 27 kgs
Humidity: 5% to 95% Relative Humidity (Non-condensing)
Operating Temperature: 0°C-55°C
Warranty: 4 Years
Electrical connections must be done by a registered electrician.
Compliance: IEC62109-1, IEC62109-2, AS/NZS5033, AS/NZS4059. Supporting documents are available.